Pulseaudio windows

Author: t | 2025-04-25

PulseAudio on Windows. PulseAudio is automatically build for Windows using the OpenSUSE BuildService.For convenience, a zipfile containing preview binaries is available. Known problems. Of course not all functionality can be ported from Linux to Windows. Windows 10 Pulseaudio Client; Pulseaudio Linux

PulseAudio on Windows – PulseAudio - freedesktop.org

TESTED ON UBUNTU 18.04, 19.10. May work on other Debian distributions.THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.fdk-aacdream xHE-AAC forkTo run this script in a terminal run:chmod u+x DreamBuildUbuntu1804.shsudo ./DreamBuildUbuntu1804.shUse DreamRemover.sh to uninstall, or alternatively you may use sudo rm -rf /opt/dreambuild if no uninstall or upgrade is requiredDue to a bug pulseaudio support currently requires a workaround. For all installations initially run with:dream -I default -O defaultManage audio settings in pulseaudio with for example pavucontrolInstructions for setting up in Windows Subsystem for Linux (WSL)Installing WSL for Windows 10 Ubuntu 18.04 or your preference from the Microsoft StoreEnabling graphics soundDO NOT edit Line 42 in step 3. Instead run Pulseaudio as Administrator for record permission.Poor security work-around needs alternative ports, real or virtual. Enter full device path in Dream's rig com port i.e. /dev/ttyS5 A Chromecast (With Audio, Wayland / X11 Support) Using Cast to TVCommand Line Chromecast Player CATTHow to install the Python3 pulseaudio-dlna Python branch fork on Ubuntu 20.10 / Pop!_OS 20.10 Or Ubuntu 20.04 / Linux Mint 20.x / Pop!_OS 20.041. Install the pulseaudio-dlna Python 3 dependencies (minus pychromecast, that's in step):sudo apt install python3-pychromecast python3-setuptools python3-pip python3-docopt python3-chardet python3-gi python3-dbus python3-docopt python3-requests python3-setproctitle python3-protobuf python3-lxml python3-netifaces python3-zeroconf python3-urllib3 python3-psutil python3-pyroute2 python3-notify2 python3-distutils sox vorbis-tools lame flac opus-tools ffmpegIn case you've used the previous instructions about holding the pychromecast package to an older version, remove the apt hold (so the package can be updated) and upgrade the package using:sudo apt-mark unhold python3-pychromecastsudo apt install python3-pychromecast2. Remove pulseaudio-dlna if you had it installed from the Ubuntu repositories (only for Ubuntu 20.10; Ubuntu 20.04 / Linux Mint 20.x doesn't have this package in its repositories):sudo apt remove pulseaudio-dlna4. Install the pulseaudio-dlna Python 3 branch forkDownload the latest pulseaudio-dlna Python 3 branch fork release from here. Extract the downloaded archive in your home folder (after extracting it, you should have a new folder ~/pulseaudio-dlna-0.6.1 - the version can be a newer one, in case new versions are released since I write this).Now you can install pulseaudio-dlna:cd ~/pulseaudio-dlna-0.6.1/man #the version number may be different if a new version is releasedgzip pulseaudio-dlna.1cd ..python3 -m pip install --user .The gzip command used above is needed to gzip the pulseaudio-dlna.1 file to pulseaudio-dlna.1.gz, and it will probably not be needed in the future. The setup.py file expects the pulseaudio-dlna.1.gz file to exist in the man directory, but it doesn't come in the 0.6.1 release archive, so this fixes it.This installs pulseaudio-dlna in ~/.local/bin. You may not have this directory in your PATH. If that's the case, after using the python3 -m pip install... command, you'll see a warning saying that ~/.local/bin is not in PATH. To add that folder to your PATH (come on Ubuntu, just add this to the user's PATH by default!), open ~/.bashrc (or ~/.zshrc if you use Zsh) with a text editor (example: open a terminal and type gedit ~/.bashrc), and at the bottom of this file, add the following line without modifying anything else:export PATH="$HOME/.local/bin:$PATH"Then source ~/.bashrc or ~/.zshrc so the changes are used by your current terminal:source ~/.bashrc #for Bash; or:source ~/.zshrc #for ZshIn case you want to uninstall pulseaudio-dlna later, you can do that using:python3 -m pip uninstall pulseaudio-dlnaTo launch pulseaudio-dlna,

PulseAudio on Windows – PulseAudio - wiki.freedesktop.org

Open a terminal and type:pulseaudio-dlnaNext, open your system settings, head to the Sound settings and change the Output Device to your Chromecast / DLNA / UPNP device. This is how my Chromecast shows up in the Output Device section of the Sound settings:It's important to note that pulseaudio-dlna has quite a bit of lag, so it may take a while until the sound starts on your Chromecast / DLNA device.This streams all the sounds from your computer to the remote device. In case you want to stream the sound from a particular application only, install pavucontrol:sudo apt install pavucontrolThen launch pavucontrol (either by typing pavucontrol in a terminal, or launching PulseAudio Volume Control from the applications menu), and on the playback tab you can change the stream individually, for each application.For example, in the screenshot above, VLC is set to stream to my Chromecast while Chromium does not.pulseaudio-dlna has quite a few options. For example, you can get it to use a different port (it uses port 8080 by default), like this:pulseaudio-dlna --port Where PORT is the port you want to use for pulseaudio-dlna.You can also specify the codec to use:pulseaudio-dlna --codec Where CODEC can be mp3, ogg, flac, wav, opus, aac and more.You can also specify a different encoder backend (by default it uses a generic encoder), like ffmpeg, by running pulseaudio-dlna like this:pulseaudio-dlna --encoder-backend ffmpegIn case more than 1 device is discovered, you can specify which one to use using:pulseaudio-dlna --filter-device ''For more options, check out the application help:pulseaudio-dlna --helpYou might also like: How To Enable Echo / Noise Cancellation Of Microphone Input On Your Linux Desktop (PulseAudio)Thanks to Sinan H for pointing out the new pulseaudio-dlna Python3 branch fork, which is now used in this article, instead of the original instructions.. PulseAudio on Windows. PulseAudio is automatically build for Windows using the OpenSUSE BuildService.For convenience, a zipfile containing preview binaries is available. Known problems. Of course not all functionality can be ported from Linux to Windows. Windows 10 Pulseaudio Client; Pulseaudio Linux libpulse pipewire-pulse projectm-pulseaudio pulse-native-provider pulseaudio pulseaudio-alsa pulseaudio-bluetooth pulseaudio-equalizer pulseaudio-equalizer-ladspa pulseaudio-jack pulseaudio-lirc pulseaudio-qt pulseaudio-rtp pulseaudio-zeroconf pulsemixer pulseview xfce4-pulseaudio-plugin

PulseAudio on Windows PulseAudio - freedesktop.org

Multimedia RedirectionAccording to [MS-RDPEV], Multimedia Redirection is “used to transfer synchronized audio and video data from a terminal server to a terminal client. The client can play the audio and video data and synchronize this data by using the timing information provided by this protocol”. It’s also called “Video Redirection”.UsageServer RequirementThe Multimedia Redirection requires the server running the following Windows version: Windows 2008 R2: audio and video playback redirection must be enabled manually. Windows 7 Ultimate/Enterprise: works out of the box.Please refer to this blog regarding how to configure Windows 2008 R2.Note that currently only Windows Media Player supports this feature.CompilationThe following development packages must be installed to have full Multimedia Redirection features compiled in. FFmpeg (libavcodec-dev) ALSA (libasound2-dev) and/or PulseAudio (libpulse-dev) XVideo (libxv-dev)Quick StartTo use the feature, register the “tsmf” dynamic virtual channel as following:xfreerdp --plugin drdynvc --data tsmf -- (server)Audio DeviceBy default, FreeRDP will detect PulseAudio availability and then falls back to ALSA, and then use the default audio device. You can force an audio backend and optionally a sound device by adding additional arguments after tsmf. The following example forces to use the default audio device with PulseAudio:xfreerdp --plugin drdynvc --data tsmf:audio:pulse -- (server)The following example forces to use the audio device “plughw:0,0” with ALSA:xfreerdp --plugin drdynvc --data tsmf:audio:alsa:plughw:0,0 -- (server)Note that you do not need to register the rdpsnd plugin to have audio playback. The tsmf plugin generally gives higher audio quality than rdpsnd.XVideo AdaptorBy default, FreeRDP will choose the base port of the last available Pulseaudio-dlna is a streaming server which allows streaming audio from your Linux computer to a Chromecast or DLNA / UPNP device in the same network, via PulseAudio.This article explains how to install and get pulseaudio-dlna to stream audio from Ubuntu 20.10, Pop_OS! 20.10, and other Linux distributions based on this Ubuntu release, to Chromecast devices. [[Edit]] The now updated instructions below also work on Ubuntu 20.04, Linux Mint 20.x, Pop!_OS 20.04, etc.The last pulseaudio-dlna release uses Python 2, which is no longer available in many Linux distributions, which means it can no longer be used on modern Linux distributions. There is, however, a Python 3 branch that you can use, but that too is unmaintained for some time, and it has some issues, for example it's not compatible with the latest pychromecast 7.* (which is what Ubuntu 20.10 has in its repositories).Ubuntu 20.10 (and Linux distributions based on it, like Pop!_OS 20.10) does have pulseaudio-dlna in its repositories, but this package does not work properly, at least not with Chromecast devices (I can't test it with DLNA devices - it might work with those). And since Ubuntu 20.10 has pychromecast 7 in its repositories, that complicates things a bit if you want to use the Python 3 branch. But I got it to work with the help of a Python 3 branch fork, and this article explains everything to get pulseaudio-dlna to work in Ubuntu 20.10 / Pop!_OS 20.10 with Chromecast devices (it should also work with DLNA devices but like I said, I did not try it). [[Edit]] This now also works on Ubuntu 20.04, Linux Mint 20.x, Pop!_OS 20.04, etc.It's worth noting that Ubuntu 20.04 does not have pulseaudio-dlna in its repositories at all, but it does have pychromecast 4.1.0.Also, I didn't add instructions for other Linux distributions because this doesn't seem to work in a virtual machine (even though it's in the same network), so I couldn't test it properly. There are third-party packages for Fedora and Arch Linux (which use the same Python 3 branch and patch used in the instructions below), among others, so if you use those Linux distributions you can give those packages a try. If that doesn't work, use the Python 3 branch for of pulseaudio-dlna from here.Chromecast-related articles you might like:Stream Videos, Music And Pictures From Gnome To Chromecast With Cast To TV ExtensionHow To Cast Your GNOME Shell Desktop To

GitHub - pulseaudio/pulseaudio: Mirror of the PulseAudio

Wsl2-xwin-audioTips to setup GUI in wsl2.IntroductionSee Awesome-wslThe following assume that the Ubuntu 18.04 distros CanonicalGroupLimited.Ubuntu18.04onWindows_1804.2018.817.0_x64__79rhkp1fndgsc.Appx has been downloaded.InstallationThe followings are executed on a git bash shell. They can be easily translated to powershell script.Install:powershell "Add-AppxPackage .\CanonicalGroupLimited.Ubuntu18.04onWindows_1804.2018.817.0_x64__79rhkp1fndgsc.Appx"Default to wsl2 instead of wsl1:wsl --set-default-version 2Verify your installation:wsl -l -v(Optional) Create and go to another directory to store wsl filesystem (see issue):wsl --export Ubuntu-18.04 ./ubuntu-wsl.tarmkdir ubuntu-wslwsl --unregister Ubuntu-18.04wsl --import Ubuntu-18.04 ./ubuntu-wsl ./ubuntu-wsl.tarCreate a user as your-user-name:powershell "ubuntu1804 config --default-user your-user-name"Fix Ram IssueOpen wsl shell.Run sudo crontab -e -u root, add the following to drop_cache automatically every 15 min`: /proc/sys/vm/drop_caches; touch /root/drop_caches_last_run">*/15 * * * * sync; echo 3 > /proc/sys/vm/drop_caches; touch /root/drop_caches_last_runAssume you use zsh, add the following to ~/.zshrc (~/.bashrc if you use bash) to start cron service automatically: /dev/null">[ -z "$(ps -ef | grep cron | grep -v grep)" ] && sudo /etc/init.d/cron start &> /dev/nullTo allow starting cron service without asking by root password, run sudo visudo and add:%sudo ALL=NOPASSWD: /etc/init.d/cron startTo check when did you last clear your caches, run:sudo stat -c '%y' /root/drop_caches_last_run(Optional) Leave wsl and open Git Bash, limit the memory usage by placing .wslconfig (sample) to ~/.wslconfig.Install GUI (X Server) and Audio (PulseAudio)There are a few ways to install X Server and PulseAudio for Windows, my choice here is the good old Cygwin.Install Cygwin and add the directory of cygwin.exe to your environment variable PATH. I recommend doing this via scoop: scoop install cygwin.Check this in the wsl shell: which cygwin.exeRun cygwin-setup.exe, install xinit, pulseaudio, and pulseaudio-module-x11.Install packages in Ubuntu wsl:sudo apt install x11-apps ubuntu-restricted-extrasConfigurationReference: Cygwin/X OpenGL and PulseAudio.Copy xpa and killxpa to ~/bin and do export PATH="$HOME/bin":$PATH. Make sure that you can call cygwin.exe.Export the following environment variables:# x11 opengl rendering options export LIBGL_ALWAYS_INDIRECT=0export LIBGL_ALWAYS_SOFTWARE=0# display to Xserver, sound to audiopulse serverexport DISPLAY=$(grep -m 1 nameserver /etc/resolv.conf | awk '{print $2}'):0.0export PULSE_SERVER=tcp:$(grep -m 1 nameserver /etc/resolv.conf | awk '{print $2}')xpa: run X server + PulseAudiokillxpa: kill X server + PulseAudioAdd the following to run xpa automatically when you start the terminal and run killxpa automatically when you close the terminal. /dev/nullfi# run when exit if

GitHub - pulseaudio/pulseaudio: Mirror of the PulseAudio sound

48000 Hz, and set the sample format and rate identically in Audacity. More help at: If pulseaudio is used as the audio device, repeatedly starting and stopping playback or recording in quick succession (or holding down the Play or Record button) may lead to a freeze. Workaround: bypass pulseaudio by setting the playback and recording device to an ALSA/hw choice in Device Toolbar.Bugs requiring more investigation(Windows Vista, 7) When a USB device is connected, the listing of inputs for the built-in sound device in Device Toolbar or Devices Preferences may become corrupt, indicating single inputs as multiple inputs. It may only be possible to record from the built-in input which is currently set as default at "Sound" in the Windows Control Panel, irrespective of the input selected in Audacity. Workaround: Try Transport > Rescan Audio Devices, or a computer reboot.Please report make and model number of devices that exhibit the issue, along with description of symptoms and any steps you have noticed that create the issue.(Windows) There may be substantial delays drawing the waveform in some circumstances. These include fitting longer zoomed-in projects to the window, or when zooming in on fitted projects, also after importing files or running effects.(Linux) If Audacity is compiled with the option to use libsamplerate and the default "Best Sinc Interpolator" for high-quality conversion is used, Tracks > Resample may lead to truncation of the waveform. Workaround: change the project rate to the desired rate, export the track and re-import it.(Windows Vista) If you change the input volume in Audacity and then record, the volume is reset to its original level. This appears to occur mostly with a few specific USB devices, and sometimes only on Vista SP1, so it is currently hard for us to fix. Workaround: Check if the manufacturer supplies their own. PulseAudio on Windows. PulseAudio is automatically build for Windows using the OpenSUSE BuildService.For convenience, a zipfile containing preview binaries is available. Known problems. Of course not all functionality can be ported from Linux to Windows. Windows 10 Pulseaudio Client; Pulseaudio Linux libpulse pipewire-pulse projectm-pulseaudio pulse-native-provider pulseaudio pulseaudio-alsa pulseaudio-bluetooth pulseaudio-equalizer pulseaudio-equalizer-ladspa pulseaudio-jack pulseaudio-lirc pulseaudio-qt pulseaudio-rtp pulseaudio-zeroconf pulsemixer pulseview xfce4-pulseaudio-plugin

pulseaudio/pulseaudio - PulseAudio Sound Server (mirrored from

My custom themes, config and programs on Void Linux XFCE4 About • Features • Usage • Screenshots • Credits • LicenseAboutAfter some time using Void Linux, I installed some custom themes config and user configs for some essential programs like Wireplumber and Chrony. And now I'm sharing it, feel free to write a issue if you find some problem.FeaturesBesides the default programs and configs on Void Linux XFCE4 image, my custom config includes:Themes:Nordic ThemeCandy IconsDracula ThemeSystem Info:HtopBtopNeofetchProgramsGitCode OSSOBS StudioDocker and Docker ComposeMultimediaxfce4-pulseaudio-pluginxfce4-screenshooterWireplumberPipewireDate and TimeChronyNerd FontsUsageThis guide will use Void's package manager commands but this packages should be present in almost all distros.If you want to install only the themes:If you want to install all my programs:sudo xbps-install htop btop neofetch git vscode obs docker docker-compose xfce4-pulseaudio-plugin xfce4-screenshooter pipewire wireplumber chronyAnd make sure your bashrc has:############################ DEFINE CONFIG BASE PATH ############################export XDG_CONFIG_HOME="$HOME/.config"Installing Nordic Themegit clone ~/.themes/"Nordic Theme"Now go to XFCE4 Appearence and the theme should be there.Installing Candy Iconsgit clone ~/.icons/"Candy Icons"Now go to XFCE4 Appearence and the icons should be there.Installing Dracula Theme on XFCE4 TerminalClone the repository:git clone open the folder and put the file Dracula.theme on: ~/.local/share/xfce4/terminal/colorschemesMultimediaVoid Linux XFCE4 comes with pulseaudio, make sure you don't have it:sudo xbps-remove pulseaudioThis command may result on error if you are using packages with pulseaudio dependency, so uninstall them too.If you already installed pipewire and wireplumber you can paste this file on this path:~/.config/pipewire/pipewire.confNow for pipewire to run on startup (if autostart folder does not exist, create one on ~/.config/autostart/):ln -s /usr/share/applications/pipewire.desktop ~/.config/autostart/pipewire.desktopDate and TimeWith Chrony already installed just run to enable Chrony service on runit:sudo ln -s /etc/sv/chronyd /var/serviceNerd FontsFor render special emojis, glyphs and characters install the following:sudo xbps-install noto-fonts-emoji nerd-fontsThis is a huge pack with lots of fonts, pick you most like on XFCE4 Appearence.ScreenshotsCreditsBesides the project links