Acls rhythms

Author: o | 2025-04-25

‎ Best ACLS App for the iPhone - ACLS RHYTHMS AND QUIZ ACLS Rhythms and Quiz is one of the first and still THE BEST ACLS App on the Apple App Store. ACLS Rhythms and Quiz - ‎ Best ACLS App for the iPhone - ACLS RHYTHMS AND QUIZ ACLS Rhythms and Quiz is one of the first and still THE BEST ACLS App on the Apple App Store. ACLS Rhythms and Quiz -

ACLS Rhythms for the ACLS Algorithms - Affordable ACLS

Access Control Lists Access control lists (ACLs) are used by many different features. When applied to interfaces or globally as access rules, they permit or deny traffic that flows through the appliance. For other features, the ACL selects the traffic to which the feature will apply, performing a matching service rather than a control service. The following sections explain the basics of ACLs and how to configure and monitor them. Access rules, ACLs applied globally or to interfaces, are explained in more detail in Access Rules. About ACLs Access control lists (ACLs) identify traffic flows by one or more characteristics, including source and destination IP address, IP protocol, ports, EtherType, and other parameters, depending on the type of ACL. ACLs are used in a variety of features. ACLs are made up of one or more access control entries (ACEs). ACL Types The ASA uses the following types of ACLs: Extended ACLs—Extended ACLs are the main type that you will use. These ACLs are used for access rules to permit and deny traffic through the device, and for traffic matching by many features, including service policies, AAA rules, WCCP, Botnet Traffic Filter, and VPN group and DAP policies. See Configure Extended ACLs. EtherType ACLs—EtherType ACLs apply to non-IP layer-2 traffic on bridge group member interfaces only. You can use these rules to permit or drop traffic based on the EtherType value in the layer-2 packet. With EtherType ACLs, you can control the flow of non-IP traffic across the device. See Configure EtherType ACLs. Webtype ACLs—Webtype ACLs are used for filtering clientless SSL VPN traffic. These ACLs can deny access based on URLs or destination addresses. See Configure Webtype ACLs. Standard ACLs—Standard ACLs identify traffic by destination address only. There are few features that use them: route maps and VPN filters. Because VPN filters also allow extended access lists, limit standard ACL use to route maps. See Configure Standard ACLs. The following table lists some common uses for ACLs and the type to use. Table 1. ACL Types and Common Uses ACL Use ACL Type Description Control network access for IP traffic (routed and transparent mode) Extended The ASA does not allow any traffic from a lower security interface to a higher security interface unless it is explicitly permitted by an extended ACL. In routed mode, you must use an ACL to permit traffic between a bridge group member interface and an interface outside same the bridge group. Note To access the ASA interface for management access, you do not also need an ACL allowing the host IP address. You only need to configure management access according to the general operations configuration guide. Identify traffic for AAA rules Extended AAA rules use ** NEW & IMPROVED** ECG Mastery is better than ever! Our new look features color graphics and updated content to help you master EKG interpretation effortlessly.The simplest way to learn ECG interpretation. Study on-the-go with ECG strips, full-color graphics, up-to-date information tables, core clinical facts, and never again be confused by a 12-lead ECG or wonder what an abnormal EKG means.Download ECG Mastery and see why we are the best electrocardiogram app on the market!Whether you are a paramedic, nurse, clinician, or medical student, ECG Mastery simplifies the learning process and helps you interpret ECGs with confidence.Why choose ECG Mastery: Created by the makers of top-selling NCLEX Mastery, FNP Mastery, and ACLS Mastery apps, ECG Mastery offers a streamlined, efficient way to learn ECG interpretation. Whether you are a paramedic, nurse, clinician, or medical student, our app helps you approach every EKG monitor line with confidence and understanding.• Master ECG interpretation: Comprehensive guides and tips.• No More Big Books: All essential information in one app.• Lead Placement Diagrams: Axis interpretation and more.• Dozens of 12 Lead ECGs: Only learn what’s clinically relevant and safely ignore the rest.• Practice Tools: Interpret typical and uncommon heart rhythms on EKG strips.Save time, energy, and money by avoiding complicated textbooks and expensive on-site courses. Study where and when you want, and only learn what’s necessary for your clinical practice. Download ECG Mastery today and see why we are the best electrocardiogram app on the market!Subscribe and get access to all content:• 1 Month: $11.99 each month• 3 Months: $29.99 every three months• 12 Months: $74.99 each yearUpon confirming your purchase, you'll be billed immediately. Your subscription will automatically renew unless you turn off the auto-renewal feature at least 24 hours before the end of the current subscription period. After purchase, you can manage your

ACLS Rhythm Review (20 basic rhythms to memorize for ACLS)

Modified the following commands: access-list extended . EtherType ACL support for IS-IS traffic 8.4(5), 9.1(2) In transparent firewall mode, the ASA can now control IS-IS traffic using an EtherType ACL. We modified the following command: access-list ethertype {permit | deny} isis. Support for Cisco TrustSec in extended ACLs 9.0(1) You can now use Cisco TrustSec security groups for the source and destination. You can use an identity firewall ACL with access rules. We modified the following commands: access-list extended . Unified extended and webtype ACLs for IPv4 and IPv6 9.0(1) Extended and webtype ACLs now support IPv4 and IPv6 addresses. You can even specify a mix of IPv4 and IPv6 addresses for the source and destination. The any keyword was changed to represent IPv4 and IPv6 traffic. The any4 and any6 keywords were added to represent IPv4-only and IPv6-only traffic, respectively. The IPv6-specific ACLs are deprecated. Existing IPv6 ACLs are migrated to extended ACLs. See the release notes for more information about migration. We modified the following commands: access-list extended , access-list webtype . We removed the following commands: ipv6 access-list, ipv6 access-list webtype, ipv6-vpn-filter. Extended ACL and object enhancement to filter ICMP traffic by ICMP code 9.0(1) ICMP traffic can now be permitted/denied based on ICMP code. We introduced or modified the following commands: access-list extended , service-object, service. Configuration session for editing ACLs and objects. Forward referencing of objects and ACLs in access rules. 9.3(2) You can now edit ACLs and objects in an isolated configuration session. You can also forward reference objects and ACLs, that is, configure rules and access groups for objects or ACLs that do not yet exist. We introduced the clear configuration session, clear session, configure session, forward-reference, and show configuration session commands. ACL support for Stream Control Transmission Protocol (SCTP) 9.5(2) You can now create ACL rules using the sctp protocol, including port specifications. We modified the following command: access-list extended . Ethertype rule support for the IEEE 802.2 Logical Link Control packet's Destination Service Access Point address. 9.6(2) You can now write Ethertype access control rules for the IEEE 802.2 Logical Link Control packet's Destination Service Access Point address. Because of this addition, the bpdu keyword no longer matches the intended traffic. Rewrite bpdu rules for dsap 0x42 . We modified the following commands: access-list ethertype Support in routed mode for Ethertype rules on bridge group member interfaces and extended access rules on Bridge Group Virtual Interfaces (BVI). 9.7(1) You can now create Ethertype ACLs and apply them to bridge group member interfaces in routed mode. You can also apply extended access rules to the Bridge Virtual Interface (BVI) in addition to the member interfaces. We modified the following commands: access-group ,. ‎ Best ACLS App for the iPhone - ACLS RHYTHMS AND QUIZ ACLS Rhythms and Quiz is one of the first and still THE BEST ACLS App on the Apple App Store. ACLS Rhythms and Quiz -

ACLS ECG Rhythm Test 1 - ACLS ECG Rhythm

Become inactive. For example, if the specified end time is 3:50, because the end time is inclusive, the command is picked up anywhere between 3:51:00 and 3:51:59. After the command is picked up, the ASA finishes any currently running task and then services the command to deactivate the ACL. Licensing for Access Control Lists Access control lists do not require a special license. However, to use sctp as the protocol in an entry, you must have a Carrier license. Guidelines for ACLs Firewall Mode Extended and standard ACLs are supported in routed and transparent firewall modes. Webtype ACLs are supported in routed mode only. EtherType ACLs are supported for bridge group member interfaces only, in routed and transparent modes. Failover and Clustering Configuration sessions are not synchronized across failover or clustered units. When you commit the changes in a session, they are made in all failover and cluster units as normal. IPv6 Extended and webtype ACLs allow a mix of IPv4 and IPv6 addresses. Standard ACLs do not allow IPv6 addresses. EtherType ACLs do not contain IP addresses. Additional Guidelines When you specify a network mask, the method is different from the Cisco IOS software access-list command. The ASA uses a network mask (for example, 255.255.255.0 for a Class C mask). The Cisco IOS mask uses wildcard bits (for example, 0.0.0.255). Normally, you cannot reference an object or object group that does not exist in an ACL or object group, or delete one that is currently referenced. You also cannot reference an ACL that does not exist in an access-group command (to apply access rules). However, you can change this default behavior so that you can “forward reference” objects or ACLs before you create them. Until you create the objects or ACLs, any rules or access groups that reference them are ignored. To enable forward referencing, use the forward-reference enable command. (Extended ACL only) The following features use ACLs, but cannot accept an ACL with identity firewall (specifying user or group names), FQDN (fully-qualified domain names), or Cisco TrustSec values: VPN crypto map command VPN group-policy command, except for vpn-filter WCCP DAP Configure ACLs The following sections explain how to configure the various types of ACL, Read the section on ACL basics to get the big picture, then the sections on specific types of ACL for the details. Basic ACL Configuration and Management Options An ACL is made up of one or more access control entries (ACEs) with the same ACL ID or name. To create a new ACL, you simply create an ACE with a new ACL name, and it becomes the first rule in the new ACL. Working with an ACL, you can do the following things: Examine High security interface to a low security interface). However, if you explicitly deny all traffic with an EtherType ACE, then IP and ARP traffic is denied; only physical protocol traffic, such as auto-negotiation, is still allowed. IP Addresses Used for Extended ACLs When You Use NAT When you use NAT or PAT, you are translating addresses or ports, typically mapping between internal and external addresses. If you need to create an extended ACL that applies to addresses or ports that have been translated, you need to determine whether to use the real (untranslated) addresses or ports or the mapped ones. The requirement differs by feature. Using the real address and port means that if the NAT configuration changes, you do not need to change the ACLs. Features That Use Real IP Addresses The following commands and features use real IP addresses in the ACLs, even if the address as seen on an interface is the mapped address: Access Rules (extended ACLs referenced by the access-group command) Service Policy Rules (Modular Policy Framework match access-list command) Botnet Traffic Filter traffic classification (dynamic-filter enable classify-list command) AAA Rules (aaa ... match commands) WCCP (wccp redirect-list group-list command) For example, if you configure NAT for an inside server, 10.1.1.5, so that it has a publicly routable IP address on the outside, 209.165.201.5, then the access rule to allow the outside traffic to access the inside server needs to reference the server’s real IP address (10.1.1.5), and not the mapped address (209.165.201.5). hostname(config)# object network server1hostname(config-network-object)# host 10.1.1.5hostname(config-network-object)# nat (inside,outside) static 209.165.201.5hostname(config)# access-list OUTSIDE extended permit tcp any host 10.1.1.5 eq wwwhostname(config)# access-group OUTSIDE in interface outside Features That Use Mapped IP Addresses The following features use ACLs, but these ACLs use the mapped values as seen on an interface: IPsec ACLs capture command ACLs Per-user ACLs Routing protocol ACLs All other feature ACLs. Time-Based ACEs You can apply time range objects to extended and webtype ACEs so that the rules are active for specific time periods only. These types of rules let you differentiate between activity that is acceptable at certain times of the day but that is unacceptable at other times. For example, you could provide additional restrictions during working hours, and relax them after work hours or at lunch. Conversely, you could essentially shut your network down during non-work hours. You cannot create time-based rules that have the exact same protocol, source, destination, and service criteria of a rule that does not include a time range object. The non-time-based rule always overrides the duplicate time-based rule, as they are redundant. Note Users could experience a delay of approximately 80 to 100 seconds after the specified end time for the ACL to

ACLS ECG Rhythm Test 1 - ACLS ECG Rhythm Strips Practice

Commands available depend on whether you have previously committed the session. Possible commands are: exit—To simply exit the session without committing or discarding changes, so that you can return later. commit [noconfirm [revert-save | config-save]]—(Uncommitted sessions only.) To commit your changes. You are asked if you want to save the session. You can save the revert session (revert-save), which lets you undo your changes using the revert command, or the configuration session (config-save), which includes all of the changes made in the session (allowing you to commit the same changes again if you would like to). If you save the revert or configuration session, the changes are committed, but the session remains active. You can open the session and revert or recommit the changes. You can avoid the prompt by including the noconfirm option and optionally, the desired save option. abort—(Uncommitted sessions only.) To abandon your changes and delete the session. If you want to keep the session, exit the session and use the clear session session_name configuration command, which empties the session without deleting it. revert—(Committed sessions only.) To undo your changes, returning the configuration back to what it was before you committed the session, and delete the session. show configuration session [session_name]—To show the changes made in the session. Monitoring ACLs To monitor ACLs, enter one of the following commands: show access-list [name]—Displays the access lists, including the line number for each ACE and hit counts. Include an ACL name or you will see all access lists. show running-config access-list [name]—Displays the current running access-list configuration. Include an ACL name or you will see all access lists. History for ACLs Feature Name Releases Description Extended, standard, webtype ACLs 7.0(1) ACLs are used to control network access or to specify traffic for many features to act upon. An extended access control list is used for through-the-box access control and several other features. Standard ACLs are used in route maps and VPN filters. Webtype ACLs are used in clientless SSL VPN filtering. EtherType ACLs control non-IP layer 2 traffic. We introduced the following commands: access-list extended, access-list standard, access-list webtype, access-list ethertype. Real IP addresses in extended ACLs 8.3(1) When using NAT or PAT, mapped addresses and ports are no longer used in an ACL for several features. You must use the real, untranslated addresses and ports for these features. Using the real address and port means that if the NAT configuration changes, you do not need to change the ACLs. Support for Identity Firewall in extended ACLs 8.4(2) You can now use identity firewall users and groups for the source and destination. You can use an identity firewall ACL with access rules, AAA rules, and for VPN authentication. We

ACLS ECG Rhythm Test 1 - ACLS ECG Rhythm Strips - Studocu

The AHA ACLS app is the American Heart Association's (AHA) officially endorsed digital health solution to assist clinicians in running codes and delivering bedside ACLS care with actual patients. The app was developed by Harvard-trained physicians, in collaboration with the AHA, to help fellow physicians, nurses, physician assistants, nurse practitioners, and emergency medical technicians (EMT) deliver the highest level of advanced cardiac life support (ACLS) at the point-of-care. It began as a project to assist clinicians within Massachusetts General Hospital (MGH), a Harvard Medical School teaching hospital—and then expanded to have a global scope after significant positive impact was demonstrated. Importantly, real-time feedback from our clinician users continuously drives improvements in app design, features, and function so that you will have the best experience providing life-saving care at the bedside. The AHA ACLS app is the only one to have all content vetted by both the AHA science team and practicing Harvard-affiliated physicians. It also features the latest 2020 release of AHA recommendations for ACLS. We owe it to our patients to use the best digital health tools to give them the highest chance of surviving acute life-threatening cardiac illnesses. To this end, we have developed a low cost, intuitive, and rigorously vetted mobile app to assist clinicians— including in all stages of training—and enhance ACLS care at the bedside. Features: - Intuitive design to rapidly access 4 ACLS algorithms (i.e. cardiac arrest, tachycardia with pulse, bradycardia with pulse, and post cardiac arrest care) - Includes all ACLS content including drug therapy and dosing, reversible causes, etc. - Easy-to-read timers and ability to log rounds of CPR, epinephrine, and defibrillations - Button within cardiac arrest algorithm that allows for rapid transition to post cardiac arrest care pathway once patient achieves ROSC - All content rigorously vetted by AHA science team and practicing Harvard-affiliated physicians - Regularly updated with the most up-to-date ACLS content We continue to iterate based on real-time clinician feedback, so that you will have the best experience providing life-saving care at the bedside. AHA ACLS offers an auto-renewing annual subscription at $2.99/year with a 3-day free trial. You will have unlimited access to all content while you maintain an active subscription. Payment will be charged to the credit card connected to your Apple ID Account when you confirm the initial subscription purchase. Subscriptions automatically renew unless auto-renew is turned off at least 24-hours before the end of the current subscription period. Your account will be charged for renewal within 24-hours prior to the end of the current period. You may manage your subscription and auto-renewal may be turned off by going to your Account Settings after the purchase. Any unused portion of the free trial period, if. ‎ Best ACLS App for the iPhone - ACLS RHYTHMS AND QUIZ ACLS Rhythms and Quiz is one of the first and still THE BEST ACLS App on the Apple App Store. ACLS Rhythms and Quiz -

ACLS Rhythms and Interpretation - SaveaLife.com

Up to 4096 VLANs ● Rapid Per-VLAN Spanning Tree Plus (PVRST+) (IEEE 802.1w compatible) ● MSTP (IEEE 802.1s): 64 instances ● Spanning Tree PortFast ● Spanning Tree Root Guard ● Spanning Tree Bridge Assurance ● Cisco EtherChannel technology (up to 24 ports per EtherChannel) ● LACP: IEEE 802.3ad, IEEE 802.1ax ● Advanced PortChannel hashing based on layer 2, 3, and 4 information ● Jumbo frames on all ports (up to 9216 bytes) ● Link-level flow control (IEEE 802.3x) ● vPC Layer 3 ● Layer 3 interfaces: Routed ports on interfaces, Switch Virtual Interfaces (SVIs), PortChannels, and subinterfaces (total: 1024) ● 64-way equal-cost multipath (ECMP) ● 4096 ACL entries ● Routing protocols: Static, RIPv2, EIGRP, OSPF, and BGP ● HSRP and VRRP ● ACL: Routed ACL with layer 3 and 4 options to match ingress and egress ACLs ● VRF: VRF-Lite (IP VPN), VRF-aware unicast (BGP, OSPF, and RIP), and VRF‑aware multicast ● VRF route leaking ● Jumbo frame support (up to 9216 bytes) Security ● Ingress ACLs (standard and extended) on Ethernet ● Standard and extended layer 3 to 4 ACLs include IPv4, Internet Control Message Protocol (ICMP), Transmission Control Protocol (TCP), and User Datagram Protocol (UDP) ● VLAN-based ACLs (VACLs) ● Port-based ACLs (PACLs) ● ACLs on virtual terminals (VTYs) ● Dynamic Host Configuration Protocol (DHCP) relay ● Control Plane Policing (CoPP) Cisco Nexus Data Broker ● Topology support for tap and SPAN aggregation ● Traffic load balancing to multiple monitoring tools ● Packet truncation ● Traffic filtering based